Dual Boot Linux (Ubuntu 22.04) and Windows 11 on Modern Systems – UEFI

In order to setup a dual boot of Windows 11 and Ubuntu 22.04 on a modern system that uses UEFI, follow these steps.

1. Install Windows 11 first leaving some unpartitioned space (at least 60GB is my recommendation) on the drive you're installing Windows on.
2. Boot up the Ubuntu installer.
3. During installation, you'll be presented with an Installation Type options screen.  Choose "Something else". 

4. On the next screen, you'll see a list of drives and partitions.  On the same drive you installed Windows, create 3 new partitions. 
   1. Create an EXT4 partition for the / mount point at least 40GB in size (this is the main drive for Linux files).
   2. Create a SWAP partition at least 18GB in size.
   3. Create an EFI partition at least 500MB in size.  This is extremely important in order to get grub to install properly. 
5. Leave the "Device for boot loader installation" set as the top level drive that Windows and Ubuntu was / is being installed on.  You should not select an individual partition here.

6. Complete the installation process. 
7. You might need to change the UEFI boot order in the BIOS of your system to boot Ubuntu / Linux first versus booting the Windows EFI partition.  Since you created an EFI partition for your Linux install, it should show up as a bootable option in the bios.  Set / adjust accordingly.
8. That's it!

Recreating a Lost or Removed EFI Windows Boot Partition

In case you remove an SSD with a Windows Boot Partition that boots an installation of Windows, you'll need to recreate the boot system to be able to successfully boot again.  To recreate the boot EFI partition on another drive or partition, perform the following:

1) Create or use an existing Windows installation disc or flash drive (you can use Rufus USB to format a flash drive with a Windows ISO)
2) Boot PC using your Windows installation media (a CD, DVD, flash drive, etc containing Windows installation files)
3) Press SHIFT + F10 on the first screen to bring up Command Prompt
4) Run the following commands and click Enter each time at Command Prompt:

diskpart
list disk
select disk N (N refers to the disk which contains the deleted the EFI System partition)
list partition
create partition efi size=200
format quick fs=fat32
list partition
list volume (find the volume letter which belongs to the installed Windows OS)
exit (exit diskpart)
bcdboot M:\windows (M refers to the volume letter of installed Windows OS)

Add any additional Windows installations by repeating the bcdboot command followed by the installation path for any other Windows installations you want added to the menu.  For example, I added my Windows 7 partition using the below command:

bcdboot P:\windows

You should now be able to boot Windows again without needing the old boot partition or drive.

Instructions were modified from this post.